Solenoid for Reversible Motors Replaces Trombetta 214-1231-A51

Code: SRY22017
(4 customer reviews)
Contact Type Dpdt
Current Rating 75 Amps
Brand USAutoElectric
Operation Mode Automatic
Specification Met Oem
  • Solenoid, control Relay Switch for Reversible Motors, Camper slideout, Winch motors, other DC motors
  • See full description for OEM part reference numbers

$34.99

1 in stock

1 in stock

Description

Solenoid for Reversible Motors Replaces Trombetta 214-1231-A51,Winch Motors, Windlasses, Hydraulic Pump Motors, Camper Slide outs, Truck trap systems, Motor Home slide out Other Reversible Motors that Normally Require Multiple Solenoids. Truck Winch, Tarp System, Boat Lifts, Boat Trailers, RV Slide-outs, and RV Leveling Systems) 12 volt Terminals: 6 Copper contacts : to view Silver contact version Click here Reversible Intermittent Duty Notes: DPDT Motor Reversing Solenoid, (4) 5/16″-24 Threaded Studs for Battery Motor, (2) 6.4mm Blade Terminals for Solenoid Operation, (2) 7.1mm x 10.4mm Mounting Slots, 150 Surge Amps, 75 Amps Carry for 5 Minutes Replaces: SRY88017SC Cole Hersee: 24450BX Trombetta: 214-1211-A11, 214-1211-A11-06, 214-1211-A51, 214-1211-A, 214-1231-A11, 214-1211A11, 214-1211A11-06, 214-1211A51, 214-1211A, 214-1231A11, 2141211A11, 2141211A1106, 2141211A51, 2141211A, 2141231A11

Solenoid for Reversible Motors Replaces Trombetta 214-1231-A51

Description: Solenoid for Reversible Motors
Voltage: 12
Surge Amps: 150
Condition: New
Mounting: Flat 180 (F180)
Duty Cycle: Intermittent
Case Material: Plastic
Contact Material: Copper
Number of Terminals: 6
Notes:
  • DPDT
  • Motor Reversing
  • (4) 5/16″-24 Threaded Studs for Battery & Motor
  • (2) 6.4mm Blade Terminals for Solenoid Operation
Application: Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors & Other Reversible Motors that Normally Require Multiple Solenoids
Weight: 0.91 lbs / 0.41 kg

Silver Contacts Version Here

Additional information

Date First Available

‎ November 12, 2014

Manufacturer

‎USAutoelectric

4 reviews for Solenoid for Reversible Motors Replaces Trombetta 214-1231-A51

  1. Alexander P. Karol


    I found the reverser was just what I wanted and needed for my project. It was exactly as advertised. Straight forward markings on the body so there was no con fusion on where to put what wire. Appears to well made for many tears of use. I would recommend it.

  2. Bill Ahrendt


    Easy to install

  3. Russ Meek


    Has better response than the factory version.

  4. Ron


    exactly what I needed to open my trailer slideouts

Add a review

Your email address will not be published. Required fields are marked *