Trombetta Solenoid Contactor 852-1251-210-50

Trombetta Solenoid Contactor 852-1251-210-50

Code: 852-1251-210-50
(8 customer reviews)
  • 12 Volt Plastic DC Contactor can be used for small engine starting applications.
  • Grounded Base, Must be mounted to a grounded surface.
  • (1) Activation Terminal, 10-32 stud, plus spade; smaller profile and a lower 6.5 volt pull in voltage.
  • (2) 1/4-20 copper contact studs with push nut fasteners to lock each stud in place.
  • 15% Sustained duty, 20 sec. max. on time; Standard base bracket; No additional sealing.

$21.80

1 in stock

1 in stock

Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Trombetta Solenoid Contactor 852-1251-210-50
New OEM
3 Terminals: (2) 1/4-20 Threaded posts (1)10-32 Stud With added Flat spade
852 Plastic Series Universal fit single pole activation
Replaces:
Ariens: 03057700, 035770, 03577000, 035832, 03583200, 3057700, 35770, 35832, AR03577000, AR03583200
AYP: 110832X, 111674
Bad Boy: 108-5349-00
Bolens: 1751569
Briggs & Stratton 5409D, 5409H, 5409K, 691656, 745000, 745000MA, 745001, 807829
Gutbrod 092.05.484
Husqvarna: 506558601, 532109946, 532110832, HU532110832
MTD: 725-0530, 725-0771, 725-1426, 925-0771, 925-1426, 925-1426A
Murray: 21261, 24285, 424285, 924285, 52323, 53716
Noma: 424285, 52323, 53716
Ransomes 1530
Simplicity 1671994
Snapper: 1-8817, 7018817, 7075671, 7075671YP, 7075691YP, 75671
Stens 435-431
Toro: 111674
Troy-Bilt: 1751569, 925-1426A
Viking: 6120-430-0500
Westwood: 1530
Wright Mfg. 53490009
Trombetta Solenoid Contactor 852-1251-210-50
A durable, high temperature resistant plastic housing makes these Plastic DC Contactors suitable for a variety of environmental conditions.
This versatile family can be used for both small engine starting applications and driving electric motors, including lawn tractors, golf carts and floor sweepers.
The HP’s industry-leading 600 amp inrush capability and 5.2 volt pull-in voltage provide an extra margin of weld protection under the worst conditions.
Robust 200 amp carry and interrupt capabilities ensure long life.
The high temperature coil assembly and brass carrier for the moving contacts stand up under
punishing cranking duty. Strong, high temperature-resistant housings surround these DC Contactors, resulting in high efficiency DC Contactors.
Produced in a variety of voltages and configurations, these Plastic DC Contactors are ideal for ATVs, utility vehicles,
snowmobiles, golf cars, and lawn and garden equipment for a sure start and a strong finish.
For Other styles of single pole Flat Spade Connector Trombetta Solenoids :
Solenoid with rear L bracket Mount 812-1211-211
Solenoid With Bottom Flat Mount 812-1221-211

Additional information

Weight .5 lbs
Dimensions 4 × 4 × 4 in
Package Dimensions

‎ 4.06 x 3.35 x 3.31 inches; 6.7 Ounces
Item model number

‎ 852-1251-210-50
Date First Available

‎ August 12, 2019
ASIN

‎ B07WM29KPC
Manufacturer

‎Trombetta

8 reviews for Trombetta Solenoid Contactor 852-1251-210-50

  1. Jamie Lynn –


    This was very easy to install on my 2001 Craftsman LT1000 42″ cut 19.5hp mower. Great Quality!

  2. Daisy –


    Great

  3. Amazon Customer –

  4. Shayne Morgan –


    Bought a knock off from Amazon and wasted my money, this product worked great

  5. Anthony Coker –


    Works perfect! Thanks

  6. readykilowatt –


    arrived on time, packaging was good, good fit.

  7. Ivan Kobosh –


    work, easy install, short delivery time

  8. Robert friddle –


    What I needed and arrived on time good product thanks

Add a review

Your email address will not be published. Required fields are marked *

Related products