-
Solenoid
Trombetta 684-1221-212 DC Contactor
- 12VDC Contactor
- 4-terminals w/ (2) 5/16-24 & (2) non-grounded 10-32 studs
- Intermittent duty
- Copper contacts
- Sealed design
- Flat-bracket
Rated 4.75 out of 5(4 reviews) -
-
Solenoid
Trombetta Defender Contactor 404-2431-032
- 24 Volt Defender DC Contactor
- (2) non-grounded 5/16-24 studs, and a Deutsch 2-pin connector (DT06-25)
- 100% continuous duty; silver contacts; cast housing w/ closed-holes integral mounting brackets; sealed design
Rated 5.00 out of 5(2 reviews) -
Solenoid
Starter Solenoid 812-1211-211 Trombetta
- Works with some Briggs & Stratton mowers.
- Plastic Family: 12 Volt DC Contactor
- Coil terminals: (1) grounded 1/4″ spade; (2) 1/4-20 studs; 15% sustained duty; copper contacts; L bracket; resistant to dust, liquid.
Rated 4.78 out of 5(9 reviews) -
Shut Down Solenoid
Trombetta P610-B1V12 Pull Solenoid
- 12 Volt; Maximum Stroke of 1″; Medium “B” Spring Included
- Pull Type Solenoid Built To Withstand High Temperatures And High Vibration Environments
- Typical Applications Include: Mobile And Stationary Equipment – Lawn And Garden Equipment, Compressors, Generators And Construction Equipment
Rated 5.00 out of 5(6 reviews) -
Solenoid
Trombetta Solenoid Contactor 852-1251-210-50
- 12 Volt Plastic DC Contactor can be used for small engine starting applications.
- Grounded Base, Must be mounted to a grounded surface.
- (1) Activation Terminal, 10-32 stud, plus spade; smaller profile and a lower 6.5 volt pull in voltage.
- (2) 1/4-20 copper contact studs with push nut fasteners to lock each stud in place.
- 15% Sustained duty, 20 sec. max. on time; Standard base bracket; No additional sealing.
Rated 4.88 out of 5(8 reviews) -
Solenoid/Relay/contactor
Trombetta Contactor Solenoid 812-1221-211
- Single Male Spade Terminal
- Bottom mount Bracket
- Has slot for mounting band if needed
- Dust & Liquid Resistant
Rated 4.80 out of 5(10 reviews) -
Shut Down Solenoid
Trombetta Pull Solenoid P610-A29V12
- P610-A29V12
- Made in U.S.A. version
(0 reviews) -
Shut Down Solenoid
Trombetta Pull Solenoid P610-A1V12
- 12 Volt Pull Solenoid; maximum stroke of 1″; no spring
- Typical applications include mobile and stationary equipment, including lawn and garden equipment
- Also compressors, generators and construction equipment
(0 reviews) -
Solenoid
Trombetta 974-1215-011-09 Solenoid Contactor
- DC Contactor
- Peak Inductive Inrush Capability (Amps): 600A
- Duty Cycle: 100 Percent Continuous
- Coil Terminals: (2) Non-Grounded 10-32 Studs
- Contact Stud: (2) 5/16″-24 Studs
Rated 4.40 out of 5(5 reviews) -
Solenoid
Trombetta 684-1241-212 Solenoid Contactor
- 12 Volts
- 4-terminals:
- (2) 5/16-24 high current studs.
- (2) non-grounded 10-32 studs.
- 25% intermittent duty;
Rated 4.71 out of 5(8 reviews) -
Electrical & Batteries
Pollak 24-360P Momentary Start Switch
Brand POLLAK Item Dimensions LxWxH 2.5 x 1.5 x 2 inches Mounting Type Panel Mount International Protection Rating IP00 Connectivity Protocol X-10 Unit Count 1.0 Count Number of Items 1 - Package Dimensions: 6.096 cms (L) x 4.826 cms (W) x 3.81 cms (H)
- Package Quantity: 1
- Country of Origin: Taiwan
- Product type: AUTOPART
(0 reviews) -
Solenoid
Solenoid Trombetta 684-1211-212 684-1211-212-06
- Anthony A130052
- Leyman P34016
- Maxon 284080-01
- Trombetta 684-1211-212 (curved narrow base, shown)
- NLG APL3098
- Meyer 15220
Rated 4.40 out of 5(6 reviews) -
Starters
Starter for Honda GX340 GX390 128000-2750
Brand USAutoelectric Voltage 12 Volts Horsepower 0.4 Kilowatts - Starter Fits Honda 11HP & 13HP GX340 GX390
- Starter QDJ112 Also fits China made engine, for Outdoor Power Equipment
- 182F,188F
(0 reviews) -
Shut Down Solenoid
Shut-Down Solenoid Replaces SA-3799-12
- Fuel Shut off
- RH Mount With Bracket
(0 reviews) -
Shut Down Solenoid
Shut Down Solenoid FOR Yanmar Cummins 3931196 SA-4754-24 24 volt
- Shut Down Solenoid FOR Yanmar Cummins 3931196
- Fuel shut down solenoid
(0 reviews)
Your cart is currently empty.