“Solenoid, Replace Cole Hersee 24213, 24213BX 12V, 4 Terminals, Continuous” has been added to your cart. View cart
-
SolenoidTrombetta 684-1251-012-02 Solenoid Contactor
- Motor Home, ATV, Utility Vehicle, Snowmobile, Golf Cart, & Lawn and Garden Applications
(1 review) -
SolenoidTrombetta 722-1221-212 Contactor Sealed
- Trombetta 722-1221-212 Soledoid DC Contactor Sealed
- Notes: (2) 1/4-20 Threaded Studs, (2) 8-32 Threaded Studs, Silver Contacts
(0 reviews) -
-
-
SolenoidTrombetta Defender Contactor 404-2431-032
- 24 Volt Defender DC Contactor
- (2) non-grounded 5/16-24 studs, and a Deutsch 2-pin connector (DT06-25)
- 100% continuous duty; silver contacts; cast housing w/ closed-holes integral mounting brackets; sealed design
(2 reviews) -
SolenoidStarter Solenoid 812-1211-211 Trombetta
- Works with some Briggs & Stratton mowers.
- Plastic Family: 12 Volt DC Contactor
- Coil terminals: (1) grounded 1/4″ spade; (2) 1/4-20 studs; 15% sustained duty; copper contacts; L bracket; resistant to dust, liquid.
(9 reviews) -
Shut Down SolenoidTrombetta P610-B1V12 Pull Solenoid
- 12 Volt; Maximum Stroke of 1″; Medium “B” Spring Included
- Pull Type Solenoid Built To Withstand High Temperatures And High Vibration Environments
- Typical Applications Include: Mobile And Stationary Equipment – Lawn And Garden Equipment, Compressors, Generators And Construction Equipment
(6 reviews) -
SolenoidTrombetta Solenoid Contactor 852-1251-210-50
- 12 Volt Plastic DC Contactor can be used for small engine starting applications.
- Grounded Base, Must be mounted to a grounded surface.
- (1) Activation Terminal, 10-32 stud, plus spade; smaller profile and a lower 6.5 volt pull in voltage.
- (2) 1/4-20 copper contact studs with push nut fasteners to lock each stud in place.
- 15% Sustained duty, 20 sec. max. on time; Standard base bracket; No additional sealing.
(8 reviews) -
Solenoid/Relay/contactorTrombetta Contactor Solenoid 812-1221-211
- Single Male Spade Terminal
- Bottom mount Bracket
- Has slot for mounting band if needed
- Dust & Liquid Resistant
(10 reviews) -
Shut Down SolenoidTrombetta Pull Solenoid P610-A29V12
- P610-A29V12
- Made in U.S.A. version
(0 reviews) -
Shut Down SolenoidTrombetta Pull Solenoid P610-A1V12
- 12 Volt Pull Solenoid; maximum stroke of 1″; no spring
- Typical applications include mobile and stationary equipment, including lawn and garden equipment
- Also compressors, generators and construction equipment
(0 reviews) -
SolenoidTrombetta 974-1215-011-09 Solenoid Contactor
- DC Contactor
- Peak Inductive Inrush Capability (Amps): 600A
- Duty Cycle: 100 Percent Continuous
- Coil Terminals: (2) Non-Grounded 10-32 Studs
- Contact Stud: (2) 5/16″-24 Studs
(5 reviews) -
SolenoidTrombetta 684-1241-212 Solenoid Contactor
- 12 Volts
- 4-terminals:
- (2) 5/16-24 high current studs.
- (2) non-grounded 10-32 studs.
- 25% intermittent duty;
(8 reviews) -
Electrical & BatteriesPollak 24-360P Momentary Start Switch
- Package Dimensions: 6.096 cms (L) x 4.826 cms (W) x 3.81 cms (H)
- Package Quantity: 1
- Country of Origin: Taiwan
- Product type: AUTOPART
(0 reviews) -
